Assetto Corsa Rally: RaceHub™ and Game Setup

Assetto Corsa Rally carries the Assetto Corsa physics engine into closed-stage rally racing, pairing the series’ chassis and tyre model with rally-specific surfaces and car classes. This guide covers the recommended Asetek force feedback settings, telemetry setup for the LED and RaceView features, and control assignment in Assetto Corsa Rally.

Force Feedback Settings 

By downloading the preset package above, you can import the official recommended wheelbase settings for RaceHub for Assetto Corsa Rally.  

1. Open RaceHub. 
2. Go to the “Wheelbase” menu -> “Force Feedback Settings”. 
3. Click the three dots next to “Preset”.    
4. Click “Import as new”. 
5. Find the Assetto Corsa Rally preset for your wheelbase in the folder you just downloaded. 
6. Click “Save to wheelbase”. 

In-Game Settings

After setting up the FFB settings in RaceHub, you now need to set up the following settings in the FFB settings menu in-game.  

1. Launch Assetto Corsa Rally 
2. From the main menu, navigate to “Settings” -> “Inputs” -> “Force Feedback” 
3. Then insert the values below. 

*540 for modern cars, 900 for classic cars.

Telemetry for RaceHub LED and RaceView features 

This part of the guide will set up RaceHub to correctly receive data from your game and enable the LED features, as well as RaceView on the Invicta and Forte formula Pro wheels. It is recommended that you start the game and close it again before continuing. 

1. Open RaceHub. 
2. Go to “Settings” -> “Game Setup” and find Assetto Corsa Rally on the list. 
3. Check if a green check mark is to the right of the game name. 

Now RaceHub will receive the game data to display the LED and RaceView features. Remember to go to the “LED” and “Display” menus in RaceHub to set up the specific features.

Setting up your controls 

Now, all you need to do is assign your controls in-game. As this is a personal preference, we won’t go too much into detail here, except for how it is done. 

1. Launch Assetto Corsa Rally 
2. Navigate to “Settings” -> “Inputs” 

Here you will find the tab “Input Bindings”. Simply go through the list and set them up one by one. 

1. Click the control you want to set up. 
2. Use the input you wish to assign (push the pedal/click the button). 

Now that you have set up the force feedback, enabled the telemetry, and assigned your controls, you are ready to hit the track. Happy racing!