EA Sports WRC: RaceHub™ and Game Setup

EA Sports WRC carries the official World Rally Championship license, developed by Codemasters for EA Sports and built around rally stages that degrade dynamically as cars pass over them. This guide covers the recommended Asetek force feedback settings, telemetry setup for the LED and RaceView features, and control assignment in EA Sports WRC.

Force Feedback Settings 

By downloading the preset package above, you can import the official recommended wheelbase settings for RaceHub for EA Sports WRC.  

1. Open RaceHub. 
2. Go to the “Wheelbase” menu -> “Force Feedback Settings”. 
3. Click the three dots next to “Preset”.    
4. Click “Import as new”. 
5. Find the EA Sports WRC preset for your wheelbase in the folder you just downloaded. 
6. Click “Save to wheelbase”. 

In-Game Settings

After setting up the FFB settings in RaceHub, you now need to set up the following settings in the in-game FFB settings menu.  

1. Launch EA Sports WRC. 
2. From the main menu, press the F1 key to open “Options and Extras”. 
3. Enter the “Controls” menu and click “Edit Device” on your wheelbase. 
4. In the “Advanced” tab, change the device type to ‘Wheel’ 
5. Then insert the values below in the “Bindings” and “Vibration” tabs. 

While these presets and settings are a great starting point, adjusting and tweaking the settings to your personal preference can make a big difference and is exactly what RaceHub is for.

Telemetry for RaceHub LED and RaceView features 

This part of the guide will set up RaceHub to correctly receive data from your game and enable FFB as well as the LED features, as well as RaceView on the Invicta and Forte formula Pro wheels. It is recommended that you start the game and close it again before continuing. 

1. Make sure EA Sports WRC is NOT running. 
2. Open RaceHub. 
3. Go to “Settings” -> “Game Setup” and find EA Sports WRC on the list. 
4. Click the small “FFB” button to the right. This will install a plugin to enable FFB. 
5. Check if the “input Port” is set to 20777. 
6. Click “Save Config”. 

Now RaceHub will receive the game data to display the LED and RaceView features. Remember to go to the “LED” and “Display” menus in RaceHub to set up the specific features. 

Setting up your controls 

Now, all you need to do is assign your controls in-game. As this is a personal preference, we won’t go too much into detail here, except for how it is done. 

1. Launch EA Sports WRC. 
2. From the main menu, click the F1 button to open “Options and Extras”. 
3. Enter the “Controls” menu and click the device you want to set up. 

Here you will find the different controls you need to set up. Simply go through the list and set them up one by one. 

1. Click the control you want to set up. 
2. Use the input you wish to assign (push the pedal/click the button). 

Now that you have set up the force feedback, enabled the telemetry, and assigned your controls, you are ready to hit the track. Happy racing!