Project Motor Racing:  RaceHub™ and Game Setup 

Project Motor Racing includes modern and historic racing classes, from LMDh and GT3 to Group C and 1960s and ’70s sports cars. In this guide, we will cover the recommended force feedback settings in RaceHub, telemetry setup for LED and RaceView features, and control assignments in Project Motor Racing.

Force Feedback Settings   

By downloading the preset package above, you can import the official recommended wheelbase settings for RaceHub for Project Motor Racing.    

1. Open RaceHub.   
2. Go to the “Wheelbase” menu -> “Force Feedback Settings”   
3. Click the three dots next to “Preset”.   
4. Click “Import as new”.   
5. Find the Project Motor Racing preset for your wheelbase in the folder you just downloaded.   
6. Click “Save to wheelbase”.   

In-Game Settings

After setting up the FFB settings in RaceHub, you now need to set up the following settings in the FFB settings menu in-game.    

1. Launch Project Motor Racing.   
2. From the main menu, navigate to “Settings” -> “controls” (choose your Asetek Racing wheelbase) -> “Input Device Settings” 
3. Use the settings below, and insert them.

While these presets and settings are a great starting point, adjusting and tweaking the settings to your personal preference can make a big difference and is exactly what RaceHub is for.

Telemetry for RaceHub LED and RaceView features   

This part of the guide will set up RaceHub to correctly receive data from your game and enable the LED features, as well as RaceView on the Invicta and Forte Formula Pro wheels. We recommend starting the game and closing it again before continuing.   

1. Open RaceHub.   
2. Go to “Settings” -> “Game Setup” and find Project Motor Racing on the list.   
3. Click the + icon if the game hasn’t been detected yet.   
4. Return to Project Motor Racing and navigate to “Settings” -> “Preferences”   
5.  Set UDP Enabled to ‘On’. 
6. Verify that the UDP Port is set to 7576 and UDP Host is set to 224.0.0.150 

Now RaceHub will receive the game data to display the LED and RaceView features. Remember to go to the “LED” and “Display” menus in RaceHub to set up the specific features.   

Setting up your controls   

Now, all you need to do is assign your controls in-game. As this is a personal preference, we won’t go too much into detail here, except for how it is done.   

1. Launch Project Motor Racing.   
2. Navigate to “Settings” -> “controls” (choose your Asetek Racing products)-> “Control Bindings” 

Here, you will find all controls listed. Go through each one and set them up one by one.   

1. Click the control you want to set up.   
2. Use the input you wish to assign (push the pedal/click the button).   

That’s everything configured. Now you are ready to hit the track!