In this video, we demonstrate how to mount the Asetek SimSports Bottom Mount with Tilt on a sim racing rig.

This is just a rig used as an example, and your rig may vary. These are the tools and parts you need to install the Asetek SimSports Bottom Mount with Tilt.

4 mm Allen key
Wrench or 10 mm spanner (depending on your rig – not used in this instruction)
4 x M6x8 Screws
4 x M6x12 Screws
4 x M6x16 Screws
4 x Washers
4 x M6 Nuts
4 x M6 t-slot nuts