In this video, we demonstrate how to mount the Asetek SimSports Side Mount With Tilt on a sim racing rig.

This is just a rig used as an example, and your ring may vary. These are the tools and parts you need to install the Asetek SimSports Side Mount with Tilt.

• 4 mm Allen key Wrench or 10 mm spanner (depending on your rig – not used in this instruction)
• 4 x M6x8 Screws
• 4 x M6x12 Screws
• 4 x M6x16 Screws
• 4 x Washers
• 4 x M6 Nuts
• 4 x M6 t-slot nuts
• 4 x M8x16 Screws