In this video, we demonstrate how to mount the Asetek SimSports Front Mount on a sim racing rig.

This is just a rig used as an example, and your rin may vary. These are the tools and parts you need to install the Asetek SimSports Front Mount.  

• Torx 10 screwdriver 
• 3 mm Allen key 
• 4 mm Allen key 
• 5 mm Allen key 
• Mini wrench (included) 
• Wrench or 3 mm spanner (depending on your rig – not used in this instruction) 
• 4 x M6x20 Socket cap screw 
• 4 x M5x20 Socket cap screw 
• 4 x M8x25 Button head screw 
• 8 x M8x16 Button head screw 
• 2 x M3x8 Screws
• 4 x Washers 
• 4 x M8 Nuts 
• 8 x M8 T-slot nuts