In this video, we demonstrate how to mount the Asetek SimSports Bottom Mount on a sim racing rig.

This is just a rig used as an example, and your rig may vary. These are the tools and parts you need to install the Asetek SimSports Bottom Mount.

• Torx 10 screwdriver
• 4 mm Allen key Wrench or 10 mm spanner (depending on your rig – not used in this instruction)
• 4 x M6x14 Countersunk screws (7 if you use the mount as a converter from a 3-hole pattern)
• 4 x M6x16 Screws
• 4 x Washers
• 4 x M6 Nuts
• 4 x M6 t-slot nuts