In this video, we demonstrate how to mount the Asetek SimSports Wheelbase Mount with Tilt on a sim racing rig.

This is just a rig used as an example, and your rig may vary. These are the tools and parts you need to install the Asetek SimSports Bottom Mount with Tilt.

• 4 mm Allen Key
• 5 mm Allen Key
• Wrench or 10 mm Spanner
• 4 x M6x8 Screws
• 4 x M6x12 Screws
• 4 x M6x16 Screws
• 4 x Washers
• 4 x M6 Nuts
• 4 x M6 T-slot Nuts
• 4 x M8x8 Screws