Pagani Huayra R, Sim Racing Pedalset
Pagani Huayra R, Sim Racing Pedalset – Adjusting the Throttle pedal angle
Updated on September 21, 2022
1. You can adjust the pedal stop on the throttle pedal by
loosening the locking thumbnut
2. Remove the rod clevis and lift up the rod
3. Push the pedal slightly forward and rotate the thumbscrew
(Clockwise to move the pedal forwards, Counter-Clockwise
to move the pedal backwards)
4. Once you have achieved your desired position, tighten the
locking thumbnut and re-insert the rod clevis
5. Recalibrate your pedals in the RaceHub™ (see section 6.3
Pedal Calibration)
Always remember that the spring must not act as a stop, instead adjust the throttle pedal stop
(see 4.2.7 throttle travel distance adjustment)
